Free tools / Audio file checker

before you hit send

Audio file checker

Drop in a take to see its sample rate, bit depth, length, peak level, clipping and room tone. Add the client's spec and it'll tell you if anything doesn't match. The file stays on your device.

Your file is read on your device and isn't uploaded anywhere.

The client's spec (optional)

Preset

Fill in whatever the brief asks for. Change these after checking a file and the results update.

your file

Choose a file to check it.

What the checker looks at

  • Sample rate, bit depth and channels are read from the file's header for WAV, AIFF and FLAC files, and the sample rate and channels for MP3. For other types, your browser decodes the audio and the checker measures that.
  • Peak is the loudest single sample, in dBFS. 0 dBFS is the very top of what the file can hold.
  • Clipping. When three or more samples in a row sit at the very top, the waveform has probably been flattened, which can sound like crackle or distortion. Listen back at those moments. They're marked in red on the waveform.
  • Average (RMS) gives a rough sense of overall loudness. It isn't the same as the LUFS loudness some broadcasters and platforms ask for.
  • Quietest moment is the quietest quarter of a second in the file, which is usually your room tone between lines.
  • Start and end. How long the file runs before the first sound louder than −40 dBFS, and after the last one.

Every client's spec is different

There isn't one right format for a voiceover. Some clients want WAV at 48 kHz, others 44.1 kHz or an MP3, mono or stereo, with or without room tone at the ends. Always check the brief, and if it doesn't say, ask. The checker tells you what your file is, so you can match whatever they asked for.

The ACX audiobook preset

ACX publishes the technical requirements for audiobooks it accepts. The preset checks a file against them: an MP3 at 192 kbps or higher with a constant bit rate, 44.1 kHz, peaks no higher than −3 dB, an average level between −23 dB and −18 dB RMS, a noise floor no higher than −60 dB RMS, 1 to 5 seconds of room tone at the start and end (ACX's recommendation), and no more than 120 minutes per file. Taken from ACX audio submission requirements, checked on 24 October 2026.

ACX also asks for things a file checker can't see, like one chapter per file, the section name read at the start, and every file in the same channel format, all mono or all stereo. It also requires human narration. Its own tools have the final say, and they may measure slightly differently from this page.

Recorded on your phone?

Phone voice memo apps often save compressed files such as M4A. If the client wants a WAV, export or convert it in an audio editor before sending. Converting a compressed file to WAV changes the format, but it won't bring back detail the compression removed.

Your files are read on your device and aren't sent anywhere. Want to record your next take while reading the script? Try the free autocue.